Deformed steel bars Oman contractors specify are the ribbed reinforcement bars that give concrete its tensile strength. Al Yusr supplies deformed steel bars in diameters from 8mm to 32mm from Jindal, Qatar Steel and epoxy coated ranges, stocked in Muscat and across 8 branches for foundations, columns, beams and slabs.

The ribs on the surface let concrete grip the bar, so load passes between steel and concrete without slipping. That is why deformed bars, often called rebar, are the standard for reinforced concrete in buildings, bridges and infrastructure. As a steel supplier in Muscat since 1975, we keep the sizes contractors order most in stock.

Deformed steel bars Oman: specifications and sizes

• Jindal: high-tensile deformed TMT bars in 8, 10, 12, 14, 16, 18, 20, 25 and 32mm.
• Qatar Steel (QASCO): grades B500B and B500C in 8, 10, 12, 14, 16, 18, 20, 25 and 32mm.
• Epoxy coated: fusion-bonded coating for aggressive environments in 8, 10, 12, 14, 16, 18, 20, 22, 25 and 32mm.

Where deformed steel bars Oman is used

• Foundations, footings and raft slabs
• Columns, beams and shear walls
• Suspended slabs and staircases
• Retaining walls, bridges and infrastructure
• Coastal and marine works (epoxy coated bars)

Choosing the right deformed steel bars

Match bar diameter and grade to your structural drawings. Smaller diameters of 8 to 12mm are typical for stirrups, slabs and walls, mid sizes of 14 to 20mm for beams and columns, and 22 to 32mm for heavy columns and foundations. For structures exposed to salt air, chlorides or constant moisture, ask about epoxy coated bars, which protect the steel and extend service life. Our team can confirm availability of each size and grade for your programme.

Handling and storage on site

Keep bars off the ground on bearers, separate them by diameter and grade, and cover stacks to limit rust and mud. Light surface rust is normal, but heavy scale should be checked against your specification. Handle epoxy coated bars with padded slings and repair any damaged coating before the pour.

What to check before you order deformed steel bars

Confirm three things before you place an order: the diameters and quantities on your bar schedule, the grade your engineer has specified, and whether any element needs epoxy coated bars. Check delivery lengths against your cutting plan, because standard lengths affect waste, and ask about mill certificates if your consultant requires test documentation. Giving us the site location and the date you need the first load helps us plan delivery from the nearest branch and avoid idle crews waiting for steel.

Why buy deformed steel bars Oman from Al Yusr

• Established Omani steel supplier since 1975
• Jindal, Qatar Steel and epoxy coated bars from one source
• Eight branches from Salalah to Sohar
• Cutting and bending available on request

Deformed steel bars Oman engineers specify follow the same principle used worldwide in rebar reinforcement: ribbed surfaces that bond with concrete.

See our steel rebar Oman overview, order cut and shaped bars through our rebar cut and bend service, and add BRC mesh and binding wire to the same delivery.

Related products from Al Yusr

Watch: Al Yusr building materials in Oman

Frequently asked questions

What sizes of deformed steel bars are available?

Al Yusr supplies deformed steel bars from 8mm to 32mm, including 8, 10, 12, 14, 16, 18, 20, 25 and 32mm, with 22mm in epoxy coated bars.

Which brands of deformed steel bars Oman customers can buy?

Jindal, Qatar Steel (QASCO) and epoxy coated bars.

What grades does Qatar Steel rebar come in?

Qatar Steel bars are supplied in grades B500B and B500C.

Can I buy deformed steel bars cut and bent?

Yes. Our cut and bend unit prepares bars to your bar bending schedule.

Get a quote for deformed steel bars Oman

Tell us what you need and where it is going. Call +968 9602 2333 or email [email protected], and our team will confirm stock, quantities and delivery. Online ordering is also available at shop.alyusroman.com.