
Shuttering plywood Oman builders use is the film-faced board that shapes concrete on site. Al Yusr supplies formwork plywood in 12mm and 18mm from several brands, built for a smooth concrete finish and repeated reuse, from stock in Muscat and across 8 branches.
A good board resists water and swelling, keeps its edges and strips cleanly, which lowers the cost of every pour. We stock premium and economy options so you can match brand and thickness to the number of reuses the job needs.
Table of Contents
Shuttering plywood Oman: specifications and sizes
- Tek-AY: Al Yusr’s own branded plywood, made by Tekcom to our specification and exclusive to Al Yusr.
- Fivestar: heavy-duty film-faced plywood bonded with WBP phenolic glue.
- Feiyawood: water-resistant phenolic film surface over a hardwood core.
- Syply: cross-bonded core with a water-resistant glue line.
- Tekcom: film-faced formwork boards from Vietnam.
- Desertplex: film-faced formwork boards for site use.
Thickness: 12mm and 18mm. Standard panel: 1220 x 2440mm (4 x 8 ft) on Tek-AY and Fivestar.
Where shuttering plywood Oman is used
- Slab, beam and column formwork
- Walls and lift cores
- Curved shuttering (12mm)
- Load-bearing formwork (18mm)
12mm or 18mm shuttering plywood?
Use 12mm boards for lighter formwork, walls and curved shuttering, and 18mm for load-bearing slabs, columns and beams. Follow your formwork designer for spans and support spacing, and plan the number of reuses before choosing a brand, since a higher quality film gives more pours per board.
Getting more reuses from plywood
Seal cut edges with edge sealer, apply release agent before each pour, clean boards straight after stripping and stack them flat under cover. Avoid hammering on the film face, since damage to the film is what ends a board’s life early.
What to check before you order shuttering plywood
Confirm the thickness, panel size and number of reuses planned, then choose the brand that suits. Check delivery for edge damage, film defects and warping, and unload flat. Tell us the formwork area and pour programme and we can suggest quantities. For repeat pours, edge sealing and good storage have more effect on the number of uses than the brand alone.
Our team can also help you combine boards: premium brands for visible concrete faces and economical boards for hidden slabs. That mix controls cost without compromising finish where it matters.
Where to buy shuttering plywood Oman: Al Yusr branches
Al Yusr supplies shuttering plywood Oman from our head office in Ghala Al Sinaiyah, Muscat, and 7 further branches across the country: Sohar, Musanaa, Barka, Nizwa, Ibri, Sur and Salalah. Stock held close to your site shortens lead times, and our team can arrange delivery anywhere in Oman. Call +968 9602 2333 or email [email protected] to confirm availability at your nearest branch.
Why buy shuttering plywood Oman from Al Yusr
- Six formwork brands including exclusive Tek-AY
- 12mm and 18mm in stock
- Eight branches for local delivery
- Timber supports and reinforcement on the same order
Shuttering plywood Oman sites rely on gets its strength from plywood construction, with alternating veneer grain for stable strength in both directions.
Read our plywood Oman guide, add whitewood or redwood supports, and order deformed steel bars with the same delivery.
Related products from Al Yusr
Watch: Al Yusr building materials in Oman
Frequently asked questions
What shuttering plywood does Al Yusr supply?
Film-faced boards in 12mm and 18mm from Tek-AY, Fivestar, Feiyawood, Syply, Tekcom and Desertplex.
What is Tek-AY plywood?
Al Yusr’s own branded plywood, made by Tekcom to our specification and exclusive to Al Yusr.
What size are the panels?
Tek-AY and Fivestar panels are 1220 x 2440mm (4 x 8 ft).
Which thickness suits slabs?
18mm suits load-bearing slabs, columns and beams.
Get a quote for shuttering plywood Oman
Tell us what you need and where it is going. Call +968 9602 2333 or email [email protected], and our team will confirm stock, quantities and delivery. Online ordering is also available at shop.alyusroman.com.









Reviews
There are no reviews yet.